Read from serial port in multiple times

Hello all, I'm developing a kind of simple modbus RTU server. The server start opening the serial port (RS 485) and then keep listening on this port for incoming frames.I used 2 machines, with the serial ports connected. On the first machine I have my server running, on the other machine I echo some modbus command on the serial port. My problem is that the command I send is read in multiple times, and the buffer is always overwritten. For example I send the command 0x010300000001XXYY. In the loop of the server, the read function is called three times and the buffer becomes [1, 3] then [0, 0, 0, 1] and lastly [XX, YY]. In this way I never have the complete command and modbus library gives a parsing error. How can I read and append the read bytes in the buffer?

pub fn rtu_server(unit: u8, port: &str) {
    let mut port = serial::open(port).unwrap();
    port.reconfigure(&|settings| {
        (settings.set_baud_rate(serial::Baud9600).unwrap());
        settings.set_char_size(serial::Bits8);
        settings.set_parity(serial::ParityNone);
        settings.set_stop_bits(serial::Stop1);
        settings.set_flow_control(serial::FlowNone);
        Ok(())
    })
    .unwrap();
    port.set_timeout(Duration::from_secs(3600)).unwrap();
    loop {
        let mut buf: ModbusFrameBuf = [0; 256];
        if port.read(&mut buf).unwrap() > 0 {
            println!("got frame {:?}", buf);

            do something with the frame...

        }
    }
}

Output:

got frame [1, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
got frame [0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
got frame [138, 87, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]

The result of port.read(&mut buf) should tell you how many bytes were read, you can use that to see if you actually read the full message and if not loop until that's the case.

There are shortcuts, but they depend on how you represent your commands. For example if you know all commands will exactly fill the buffer you could call .read_exact to loop until it is fully filled.

1 Like

Thank you for the reply. The problem is that Modbus commands have variable length, depending on the function and the number of registers involved. The rule should be "if read something, then keep reading until receive nothing for n milliseconds".

I don't know anything about modbus so I don't know if this is possible with the protocol, but some libraries support "streaming" parsing which returns a specific error if they need more data to parse a full message. That would be preferable over a timeout based approach, if it's possible

If you are just asking how to append when reading, you should be able to count the number of bytes read so far and pass a slice that is past the data already read. Something like below. I didn't try compiling it with the modbus types, but I see that ModbusFrameBuf is just pub type ModbusFrameBuf = [u8; 256];.

    let mut buf: ModbusFrameBuf = [0; 256];
    let mut total: usize = 0;
    loop {
        let count = port.read(&mut buf[total..]).unwrap();
        total += count;
        // check to stop reading after n ms
    }

Thank you all for your hints. I guess I found that the framed-serial crate is what I need. The problem is that this code date back to 6 yeas ago and the compilation gives a lot of errors: for example, objects that today are part of the standard, like Vec, are included manually with external crate.

This topic was automatically closed 90 days after the last reply. We invite you to open a new topic if you have further questions or comments.